AK Remodeling logo
Room with a vaulted ceiling, dark wood beams, a wood floor, a linear fireplace, and French doors

Hardwood Floor Refinishing Contractor

Hardwood Floor Refinishing in Philadelphia, PA and South Jersey

Worn, scratched, and dull hardwood restored without replacing it, from board repairs and dustless sanding to custom stain, protective coats, and the final inspection.

  • Licensed, Registered, and Insured
  • Google Guaranteed
  • 1-Year Written Warranty
  • 21+ Years of Experience
  • Free In-Home Estimate
5.0 on Google · 52 reviews

Floor refinishing

Hardwood Floor Refinishing That Restores, Not Replaces

AK Remodeling handles hardwood floor refinishing for homeowners in Bucks County, Philadelphia, South Jersey, and Montgomery County. Refinishing is the process of sanding a wood floor down to fresh, bare wood, repairing damaged boards, and applying new stain and protective coats, so a worn floor looks new again without tearing out a single plank.

Hardwood is one of the few floors you can bring back instead of replacing. Scratches, gray traffic paths, and a dull finish usually sit only in the top layer, and sanding removes them. As long as enough wood remains above the tongue of each board, the floor underneath is still sound.

Every floor we refinish is planned to:

  • Remove scratches, scuffs, and worn finish down to clean wood
  • Repair or replace damaged boards before sanding
  • Keep dust contained with a dustless sanding system
  • Match or change the color with custom stain
  • Seal the wood with a durable protective finish

Our own crew handles the repairs, sanding, staining, and coating, which keeps the finish even from wall to wall.

Row home living room with an oak strip floor half sanded to bare wood next to the worn old finish

When you need it

Is Hardwood Floor Refinishing Really Necessary?

Refinishing becomes necessary when the protective finish has worn through and the bare wood is starting to take the damage. Gray, dull traffic lanes, scratches that catch a fingernail, and water that soaks in instead of beading up are signs the coating is gone, and the boards are now exposed to stains and wear.

Signs your floors need refinishing:

  • Scratches and scuffs across the surface
  • Gray or dull paths where people walk
  • Water that darkens the wood instead of beading
  • A stain color you no longer like
  • A finish that is peeling or flaking
  • A few damaged boards in a sound floor

When a lighter job may be enough:

  • The finish is dull but not worn through: screen and recoat
  • Only one small area is damaged: spot repair
  • The floor is loose or soft underneath: new installation

Waiting too long can lead to:

  • Stains and water marks soaking into bare wood
  • Deeper sanding that uses up more of the wood
  • Board damage that needs replacement
  • A floor that refinishing can no longer save

Our process

What’s Included in Our Hardwood Floor Refinishing Service

A refinish is a sequence where each pass prepares the next. We repair loose and damaged boards, sand through several grits from coarse to fine, vacuum and tack the floor clean, apply the stain you choose, and build up protective coats with light buffing in between until the finish is smooth and even.

  • 01

    Inspection and Board Repair

    We check the wood thickness and replace or repair damaged sections first.

  • 02

    Dustless Sanding

    Modern dustless equipment removes the old coating and keeps your home cleaner.

  • 03

    Custom Staining and Color Matching

    Choose a tone from light oak to rich walnut, tested on your own floor first.

  • 04

    Sealing and Protective Coats

    Water-based or oil-based polyurethane in matte, satin, or gloss.

  • 05

    Buffing Between Coats

    Light abrasion between coats helps each layer bond and dry smooth.

  • 06

    Final Inspection and Care Tips

    We walk the floor with you and explain drying times and daily care.

Hardwood work we do:

  • Hardwood Floor Refinishing
  • Dustless Sanding
  • Custom Staining
  • Board Replacement
  • Screen and Recoat
  • Hardwood Floor Installation

Refinishing methods

How Hardwood Floor Refinishing Is Performed Safely

The right method depends on how deep the wear goes and how much wood is left to sand. A floor with a dull but intact finish may only need a light screen and fresh coat, while scratched, stained, or discolored floors need a full sand to bare wood. We measure the remaining wood before choosing.

MethodWhen It Is Used
Screen and RecoatThe finish is dull, but the wood itself is not damaged
Full Sand and RefinishScratches, stains, or worn paths reach the bare wood
Sand and Stain ChangeYou want a new color across the whole floor
Repair, Then RefinishSome boards are cracked, loose, or water damaged

Advanced work can include:

  • Board replacement with matching wood
  • Gap filling between boards
  • Stain samples on the actual floor
  • Water-based finishes with lower odor
  • Engineered floor refinishing within the wear layer limits

Pricing factors

What Affects the Cost of Hardwood Floor Refinishing

Refinishing cost depends on the floor area, the state of the wood, and the finish system you choose. A floor that only needs a sand and clear coat costs less than one with damaged boards to replace, deep stains to sand out, a color change, and stairs to finish by hand, so we quote after seeing it.

The cost depends on:

  • Total floor area
  • Board repairs and replacements
  • Stain and finish selection

Also considered:

  • Number of protective coats
  • Stairs, borders, and hand work
  • Furniture moving and access

Agreeing on the color, sheen, and repairs before sanding starts keeps the price set and the finished floor exactly as planned.

Compare

Hardwood Floor Refinishing vs Related Services

Refinishing saves the floor you already have, but it only works when the wood is solid and thick enough to sand. The table below compares refinishing with installing new hardwood, engineered hardwood, and luxury vinyl plank, so you can tell whether your floors need to be restored or replaced with something new.

ServiceWhen It Works
Hardwood Floor RefinishingThe boards are sound and the damage is in the surface
Hardwood Floor InstallationThe boards are damaged, loose, or worn too thin to sand
Engineered Hardwood FlooringYou want new real wood that tolerates humidity better
LVP FlooringYou want a waterproof floor instead of wood

Built to standard

Safety, Compliance, and Industry Standards

Refinishing involves sanding equipment, fine wood dust, and coatings that need ventilation while they cure, so the work has to be controlled from start to finish. Our crews follow National Association of Home Builders practices and International Code Council material guidance, contain the dust, ventilate the rooms, and keep the family and pets off the fresh finish.

AK Remodeling works with:

  • Licensed, registered, and trained floor technicians
  • General liability insurance coverage
  • Dustless sanding with dust collection
  • Ventilation while finishes cure
  • Finish compatibility with the existing wood
  • Protection of walls, cabinets, and trim
  • A final inspection under good light

These standards ensure:

  • Floors protected by a durable finish
  • Even color from board to board
  • Cleaner air during and after the work
  • Wood preserved for future refinishing

Why us

Why Choose AK Remodeling

Over 21 years of remodeling have taught our team that a refinished floor is only as good as the sanding behind it. We repair boards first, sand evenly so no swirl marks show, test stain colors on your own wood, and apply each coat with patience, so the floor looks rich and stays protected for years.

  • Licensed, Registered, and Insured
  • Google Guaranteed
  • 1-Year Written Warranty
  • 21+ Years of Experience
  • Free In-Home Estimate
  • Dustless Sanding and Custom Stain Matching
  • One Crew From Demolition to Final Walkthrough
  • Written Estimates Before Work Begins
  • Clean, Protected Job Sites
  • Based in Beverly, NJ

Reviews

What Our Customers Say

AK Remodeling holds a 5.0 rating on Google from 52 reviews. These are real words from homeowners we have worked for.

5.052 reviews on Google
A & K Remodeling team did a great job at my poolhouse, they installed tiles in the half bathroom, installed porcelain tile at the barbecue and install the kitchen cabinets! They did a great job. Definitely recommend.
Ricelle M. Google review
Alan is fantastic to work with — professional, detail-oriented, and really cares about doing things right. His pricing is fair, and the quality of his work is top-notch. … I highly recommend Alan for any home project — you won’t be disappointed.
Lakshmi N. Google review
All around great experience! Our go to contractor who completes jobs in a timely manner and performs meticulous work. I highly recommend!
M. T. Google review

Where we work

Service Areas

AK Remodeling is based in Beverly, NJ and provides hardwood floor refinishing for homeowners throughout Philadelphia, Bucks and Montgomery Counties, and South Jersey. Our crew works in the Pennsylvania and New Jersey communities below, from Philadelphia and Bucks County to South Jersey, and if your town is nearby but not listed, call us to confirm availability before you schedule.

And surrounding Pennsylvania and New Jersey communities.

Free estimate

Restore the Floor Before the Wood Wears Through

Every month of traffic on a worn finish grinds dirt into bare wood. Stains go deeper, gray paths spread, and the next refinish has to remove more of the board to reach clean wood. Refinishing at the first signs of wear protects the floor, keeps the cost lower, and saves wood for the future.

Call (267) 389-9449 or request your free in-home estimate online, and we will plan the right hardwood floor refinishing for your home.

  • Licensed, Registered, and Insured
  • Google Guaranteed
  • 1-Year Written Warranty
  • 21+ Years of Experience
  • Free In-Home Estimate
  • Based in Beverly, NJ

Free in-home estimate · No obligation · Prefer to talk? Call (267) 389-9449.

FAQ

Frequently Asked Questions About Hardwood Floor Refinishing

These answers cover the questions homeowners ask most often about hardwood floor refinishing: how often, dust, color changes, timelines, scratches, finishes, repairs, and engineered floors. If your question is not listed, call AK Remodeling at (267) 389-9449 and we will explain the options for your home in plain language.

How often should hardwood floors be refinished?

Most hardwood floors need refinishing every 7 to 10 years, depending on foot traffic, pets, and how well the finish is maintained. Busy entryways and kitchens wear sooner than bedrooms. A screen and recoat every few years can stretch the time between full refinishes, because it renews the protective layer before the wood itself is damaged.

Is the refinishing process dusty or messy?

Much less than it used to be. We use a dustless sanding system that pulls dust into collection equipment as the floor is sanded, which keeps your home far cleaner and the air easier to breathe. We also protect nearby surfaces and close off the work area, and we clean up thoroughly before the coating stage begins.

Can you change the color of my floors?

Yes. Because sanding takes the floor down to bare wood, refinishing is the perfect time to change the color, from light natural oak to deep walnut or modern gray tones. We apply stain samples on your own floor so you can see how the color looks with your wood and your lighting before we stain the whole room.

How long does hardwood floor refinishing take?

Most refinishing projects take 2 to 4 days, depending on the size and condition of the floors, the number of coats, and whether you choose a stain. Drying time between coats is part of the schedule and cannot be rushed. Water-based finishes generally dry faster than oil-based ones, which can shorten the time the rooms are closed.

Will refinishing remove deep scratches?

Sanding removes most scratches, dents, and surface imperfections, because it takes off the old finish and a thin layer of wood. Very deep gouges, pet damage, or dark water stains that reach far into the board may not sand out completely. In those spots, we replace the damaged boards with matching wood before the floor is refinished.

What kind of finishes do you offer?

We offer water-based and oil-based polyurethane finishes in matte, satin, or gloss sheens. Water-based finishes dry clear, have less odor, and cure faster. Oil-based finishes add a warm amber tone and a rich look. Matte and satin hide scratches and dust better than gloss, which is why they are popular in busy homes.

Can we live at home while the floors are refinished?

Yes, most homeowners stay home while their floors are refinished, as long as they can avoid the rooms being worked on. Some families choose to stay elsewhere during the coating days because of drying times and the odor of the finish, especially with oil-based products. We plan the sequence so you can still reach the kitchen and bathrooms when possible.

Do you repair damaged boards before refinishing?

Yes. Cracked, loose, stained, or water-damaged boards are repaired or replaced before sanding begins, so the refinished floor looks consistent from wall to wall. We weave new boards into the existing pattern and match the species as closely as possible, then the sanding and staining blend the repair into the rest of the floor.

Can engineered hardwood be refinished?

Often, yes, but it depends on the thickness of the real wood top layer. Thicker wear layers can be sanded and refinished one or more times, while very thin ones can only take a light screen and recoat. We check the wear layer before recommending a method, because sanding through it would ruin the plank.

How do I start a hardwood floor refinishing project?

Let us look at the floors first. Call AK Remodeling at (267) 389-9449 or request a free in-home estimate online. At the visit, we check the wood thickness and any damaged boards, talk through stain colors and sheens, recommend a screen and recoat or a full refinish, and send a written quote with the scope and the price.

Call NowFree Estimate